Dongguan Taowine Automation Technology Co.,Ltd
Add：Building1, Industrial North 3rd Road No.3, Hi-tech Zone, Songshan Lake, Dongguan
Labeling machine is the effective production of the majority of enterprises assistant, for the user to solve the big problem of manual labeling, the user in the use of labeling machines, they will often encounter labeling accuracy is not enough, this labeling deviation Solution?
Labeling accuracy deviation is mainly related to the installation of the label with the instability, the label with the deviation, with the product to the conveyor belt is not parallel to the traction wheel slip, product positioning detection are not allowed to label the standard deviation, product size error of several major factors , The labeling accuracy is not enough, to check the above factors, one by one to solve.
1. Check the label plate is loose, if there is, adjust the lock.
2. Relax the traction mechanism, pull the label back and forth to see if it is smooth, let it automatically go positive. After the label is running, clamping both sides of the limit circle, guide positive labels, to ensure that the standard is not deviated.
3. Check to adjust the tilt of the labeling head so that the direction of the label is parallel to the direction of product transportation.
4. Check the standard is uniform, if uneven, adjust the bottom of the plastic parallel axis parallel to the regulation can be.
5. Check the traction wheel is worn, loosen the traction wheel locking screw and then tighten the traction to ensure that the traction wheel does not slip.
6. Product error The edge error can cause the label deviation, the control good product quality only then may solve.
7. Peel at the end of the standard paper slack, can also lead to label deviation, the end of paper relaxation and traction speed is too low and the traction agencies related to slipping. If the traction speed is too low, then improve the traction speed can be resolved.
If the traction mechanism slips, tighten the tightening screw of the traction roller to the bottom paper without slipping.
Comprehensive check the above steps, and then run the test, basically the problem will be solved.